How to Fix Error Code 1640 on Canon Printer G3260

An error support code in the Canon printer is a symbol of something wrong. This means you want a fix to solve such eros for smooth functioning. Here we will find a reason and fix error code 1640 in Canon printer G3260. To get a whole solution, read the whole article till the end.


The error code 1640 in the G3260 printer model shows problems in the ink tank. It is not the mainly an issue, although the symptom of low ink level or an empty ink tank. Though, to cross-check this cause, you will need to check the ink tank visually.

What’s the Solution?

Looking at the support code1640 in Canon model G3260 shows a lower ink level, so you need to fill the ink tank again. The printer also stops printing your document. We have written a few easy guidelines to solve the error 1640 or ink tank level problem.

Firstly, see the Canon G3260’s front to check the ink tank level. In case you ensure that the ink is lower than the tank’s limit line, you must refill it.

  • First of all, Confirm that the printer is flat when you set it up.
  • Do not turn the printer upside down or on its side to avoid a leak.

Now let’s begin the refiling process.

Canon G3260’

Refill Ink in Canon Printer G3260

  • Open the printer:- if the ON lamp is lit, your G3260 printer is turned on.
  • Open output covers:- lift the scanning unit or open the cover.
  • Check ink level:- look which ink tank has a low ink level, after that, open its tank cap. Guess the yellow ink tank runs out of ink: open the cap.
  • Precautions:- ensure that you don’t shake the ink bottle.
  • Open new ink bottle:- hold the ink bottle and open the cap to take it out easily.
  • Fill the ink:- Align the bottle’s tip to the tank inlet, then stand the ink bottle slowly to push into the inlet.
  • Remove the empty bottle:- wait till the ink tank cap and push down the output cover to close it. Your Canon G3260’s ink tank should refill successfully.

When you try to print again, you won’t see Error Code 1640 in the Canon G3260 printer.

Author Bio:- John Mark is a self-professed security expert, he makes people aware of the security threats. His passion is just writing about cryptography, malware, Cyber security social engineering, internet.

Leave a Reply

Your email address will not be published.